You are hereForums / By Discipline / Mountain (off road) / MTB Gear / Bike lights - Bflex menu issues
Bike lights - Bflex menu issues
NB: Originally posted elsewhere on the Global Riders Network and appears via syndication.
I am having trouble accessing the setup menu on the Taskled Bflex.
The three clicks toggles between the high and low light settings but I cant seem to get the right sequence to enter the menu.
Anyone got any ideas?
Thanks
Craig
- Login to post comments
- Bookmark & share
You might have it in the wrong UI mode. Or a different UI mode to what you think it's in. I had this problem to begin. RTFM about how to change 'em.
Also, it's pointless trying to work out the 'cicks' on the fly. Write 'em down like 10-3-2 so you can punch 'em in real fast, it's a bit finicky, but OK when you sus it out.
Thanks Rob, agree with you comments. Getting the hang of things. These R Bin leds are sure bright!!
Think I am sorted.... BTW this aint what is stated in the manual. At least I didnt read it that way.
Courtesy of the taskled knowledge base.
"You can only enter the menu by pressing & holding the switch down during the initial flashing sequence. The rest of the time the menu is locked out"
Let's see 'em Craig!
If you have any problems should Taskled in the states an e-mail.
I had the same trouble you it sounds like you did for the first ones I made, (aswell as wiring the switch around the wrong way) we exchanged about 15 or so emails before we worked out what the problem was. The guy could not have been more helpful, even to the point of responding when he was on holidays. Whats more he's a "JAFA"
I want to see that housing