You are here
maestro
Maestro murder...detectives required
Hey guys so I'm in the midst of one of my most ambitious projects to date - replacing all the picot bearings on my 2008 Giant Reign. So I've got it apart as shown in the photo EXCEPT! for the middle linkage thing. The thru-bolt is out, so the piece is loose but I can't get it away from the frame! I've been pretty gentle so far because I don't want to wreck anything, but is there any trick to getting this away from the frame? Basically it seems I need to flex it open and get it around the frame, but easier said than done! Thanks for advice from anyone who's been here...
Giant Trance X3 2009 - Suspension Pivot bearings.
My trance has been a little noisy and further investigation of the causes has narrowed it down to bearings in the main pivot.
Anyone got any ideas on replacing the bearings?
Bearings rolling very rough on one side, so I have tried to repack with grease and see if that is going to help. To be tested!
I would prefer to just replace them...but am not that mechanically minded, otherwise I take it down to the bike shop....
Cheers
Shano.